Troubleshooting • Can't install Ubuntu 24.04 on new RPi5
[This seems to be a duplicate of one (or more) similar messages. I read through them all, but did not find a solution, so I am posting to see if there is now a known answer. Sorry for duplication.]I...
View ArticleGraphics, sound and multimedia • webgl trouble
Apologies if this is not the right board to post on.I've been recently developing a React app that involves Three.js, which on my RPi5's browser works perfectly with high frame rates. However, when...
View ArticleClik here to view.
Troubleshooting • Don't start Retropie or Raspberry OS. Stuck in boot
Hello,i must have done something wrong, i dont know it have to e with splash screenCan't get past the first lines of boot, it stopped therecmdline.txt console=serial0,115200 console=tty3...
View ArticlePython • Cant read holding registers from rs485 connection
I need to read holding registers from Bender Isometer that is connected to my raspi via RS-485 connector (no USB adaptor). Isometer is connected, online, its address is set to 4, baudrate is set to...
View ArticleTroubleshooting • Zero 2W setup, unpacking chromium stuck progress
Bought a zero 2W to set up pi-hole, since it's the recommended board for the pi-hole here https://www.raspberrypi.com/tutorials/r ... pberry-pi/. I'm trying to update and upgrade the required programs...
View ArticleCompute Module • How to enable i2c on pin 27 & 28, pi zero 2w
Hi, everyoneI'm having trouble activating those pins (27 and 28) for i2c use. I need them for a project.Seems like most of the advice found around is updated and doesn't help at all.I've been tried...
View ArticleGeneral discussion • Boot over 5 mins - Very Slow
I recently picked up a Raspberry Pi Zero W (not to be confused with 2nd gen) and I have never used a Raspberry Pi and don’t have much experience with Linux but it seems awfully slow. Boot times are...
View ArticleGeneral discussion • Network at boot
Hello I was working on a project and at one point I had to make it so the raspberry pi connects to the internet before it boots. I ran raspi-config but it doesn't have an option to wait for network...
View ArticleClik here to view.
Troubleshooting • Lots of "Applications.." is not responding: FORCE...
Hi community,I did install Ubuntu 24.04 LTS on my RPI 5 recently. Did customize my Desktop using GNOME extensions.. Now my environment is very unstable. A lot of "Applications" is not responding....
View ArticleTroubleshooting • Pi 5 & camera V3
New Pi 5, new camera V3, Bookworm 64 installed and updated, camera properly connected. Run libcamera-vid -t 0 results in "no cameras found". Camera works on Pi Zero W 2 with Bookworm 32. Any ideas on...
View ArticleTroubleshooting • Pi5 built in WiFi won't connect but a wifi dongle will - why?
I have a Vesper XB 8000 WatchMate AIS with a built in Wifi Client. A Raspberry Pi4 connects to the wifi client with no problem, an iPhone connects with no problems. A Mac connects with no problems,...
View ArticleSDK • Pico W not waking up from sleep mode
Since I am running a Pico W from battery, I would like to lower the power usage by enabling sleep mode (not dormant).I tried a few examples, like...
View ArticleBeginners • USB device not recognized - Low Voltage warning
Hello there!I've got some issues with my RPi 4:RPi OS is telling me, that the power supply might be insufficient. XBox 360 WiFi Controller doesn't work.Original 15W PSU from bundle.Will it be...
View ArticleBeginners • Not sure about which came first
I need to install motioneyesOS on a RP4. Do i only need to install motioneyesOS, plug it into the pi and rock and roll, or do I need to first install Ras Pi OS using the imager and then install...
View ArticleClik here to view.
Troubleshooting • Pi 4 - No Ethernet
New to Raspberry Pi as of November of last year and first time posting to the forum. My Pi 4 (8GB model) is in a case, connected to ethernet, and has been running Home Assistant from an SSD since...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Raspberry Pi 5 UART Issue: Can Only...
Hi, I'm planning to use UART to communicate with other devices. I use minicom to test the UART port and found that I only can receive data but can't send any data.In Raspberry Pi configuration, I...
View ArticleTroubleshooting • Very Strange Network Behavour!
Hi AllI really hope someone can help with this one as I'm absolutely baffled by it.I have a Pi 5 on which I installed Raspberry Pi OS; Debian GNU/Linux 12 (bookworm).I followed this with Unbound,...
View ArticleInterfacing (DSI, CSI, I2C, etc.) • Python spidev xfer2 still working?
I ran an older Python script that used spidev and got an error for using xfer2:Code: import spidevspi_device = 0spi_channel = 0max_speed_hz = 10000000 # 10MHzfram = spidev.SpiDev(spi_device,...
View ArticleGeneral discussion • Can I connect a RAM board to the pcie slot of the...
If i figure out a way to connect the ram board to the pcie slot of rpi 5, is it theoretically possible to add extra ram to it?Statistics: Posted by MomoShetty — Fri May 24, 2024 3:16 am — Replies 0 —...
View ArticleClik here to view.
HATs and other add-ons • WittyPi 4 Battery Charger
Hi there,I'm pretty new to Raspberry Pi and i've just bought a WittyPi 4 to go with my Raspberry Pi 3B – it works great, however i've bought a battery...
View Article