Clik here to view.
SDK • CMake managing Raspberry Pi Pico W project and MAX7219 display...
I am using Raspberry Pi Pico W with RP2040 microcontroller chip. I was looking to connect the raspberry pi pico w's GP0 SDA, SCL pins to connect to send data to the MAX7219 pins. My issue currently is...
View ArticleBeginners • Pi Project getting power to Multiple modules (GPIO or other)
I'm a developer and just getting started with the hardware side of things. I've done a few projects now and have had 2 of them where I run into issues with power.Project 1:I'm working on a project...
View ArticleGeneral discussion • Any ideas what's wrong with my Pi4
I bought a new Pi4 about six months ago. At first, it worked without a problem, but when I went to use it again, I found that I had no video. It's not a video fault as the HDMI output gives me the...
View ArticleGeneral discussion • Raspberry Pi 5: is there a vcgencmd command to get RP1...
Using a Raspberry Pi 5 16GB I saw that sensors command give volt and temp info for RP1 chip (I guess it by the name of the sensor; rp1_adc-isa): Code: # sensorspwmfan-isa-0000Adapter: ISA adapterfan1:...
View ArticleGaming • ZEsarUX 12
New ZEsarUX version! You can download ZEsarUX 12 from:https://github.com/chernandezba/zesarux ... sarUX-12.0Changelog:ZEsarUX 12 - Bubble Bobble edition. 16 January 2025* New things added:Added ZX...
View ArticleClik here to view.
General • Any NDA options to receive early information on upcoming Pico/RP...
See subject - RPi folks, please elaborate as applicable, thanks BR//Karl @xobliteStatistics: Posted by xoblite — Fri Jan 17, 2025 12:18 am — Replies 0 — Views 25
View ArticlePython • Obstacle Avoidance Robot Mark 3!
I need some help, I upgraded my obstacle avoidance robot to use a ultrasonic sensor. I wrote code and it can use and read the data. But, it won't move, I was wondering if anyone had any help to offer....
View ArticleGeneral discussion • How to permanently have MotionEye camera stream on a...
I have a RPi 4 with MotionEye which works good.Computers in the same network display camera streaming with no issues for days and days.I have a RPi 3 B+ with Bookworm and a HDMI display connected to...
View ArticleClik here to view.
MicroPython • PIOASM error message "delay too large" when...
I am working on a PIO program that is getting a "PIOASMError: delay too large" message. Code snippet followsCode: nop() .side(0) [7]nop() [8]nop() [31]nop() [31]When attempting to execute the program...
View ArticleNetworking and servers • PiVPN + Wireguard and acessing local IP
Dear all. I switched my router and my config stopped working. Not sure if I am doing something wrong (I have reconfigured everything again) but all help is appreciated.I have 3 devices:- a Pi @...
View ArticleNetworking and servers • WiFi Hotspot works on Pi4 but not on Pi5
sdm can easily create a hotspot, which I use from time to time. I hadn't tested it specifically on the Pi5, but did so recently, and found that it wasn't working on the Pi5. At all. But it works...
View ArticleRaspberry Pi OS • Warning messages updating rpi-eeprom today
Have not seen these on prior updates. They seem harmless, as the eeprom does get updated.Code: apt upgrade --yesReading package lists... DoneBuilding dependency tree... DoneReading state...
View ArticleStaffroom, classroom and projects • Offline hotspot and local webserver
Hello. The schools that I am working at have very restrictive internet access. They dont have a blacklist, they have a whitelist that only allows a few dozen domains to be accessed. this is a pain for...
View ArticleClik here to view.
Troubleshooting • Offline hotspot and local webserver
Hello. The schools that I am working at have very restrictive internet access. They dont have a blacklist, they have a whitelist that only allows a few dozen domains to be accessed. this is a pain for...
View ArticleClik here to view.
General discussion • "Active Cooler" thermal pad size
Hello,I have the old "Active Cooler" (no thermal pad for the RP1 and small changes like the spring) on my older PI5 and the new "Active Cooler" since yesterday on the new PI5.As you can see in the...
View ArticleAdvanced users • HTTPS for Network Install
Please consider updating the network installer image to use HTTPS. The network installer does not work on networks where the firewall blocks port 80.The network installer image itself is fetched over...
View ArticleRaspberry Pi OS • Mounting a Shared NTFS Network Drive on Bookworm
So I upgraded from an older 32 bit Rasp Pi OS to the latest 64 bit Rasp Pi OS (Bookworm). I am able to mount my shared folder off a Windows computer, but I can't seem to write to the directory. I...
View ArticleGeneral • Pico Cannot Handle Multiple Servos ?
Hi everyone!So, I am trying to control multiple (5+) servos through Raspberry Pi Pico via Servo Driver Module https://www.waveshare.com/pico-servo-driver.htmWhen I simply tell all servos to go to a...
View ArticleClik here to view.
General discussion • Need help sourcing a screen for my project
hello there, recently i have found an old TomTom GPS in my home, i have searched it up to find that it is a tomtom one 3rd edition. i have been planning to retrofit it with a new screen and a...
View ArticleClik here to view.
Beginners • pigpiod: System does not appear to be a raspberry pi
Hi, I have purchased a 5th gen (8GB version).Manually installed Raspberry Pi OS with desktop (64-bit).Everything seem to work well except the Remote GPIO Code: root@raspberrypi:~# uname -aLinux...
View Article