thanks for the help
x@x:~ $ sudo cat /var/log/motion/motion.log
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] motion_startup: Motion 4.5.1 Started
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] motion_startup: Using default log type (ALL)
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] motion_startup: Using log type (ALL) log level (NTC)
[0:motion] [NTC] [STR] [Mar 11 20:45:01] webu_start_strm: Starting all camera streams on port 8081
[0:motion] [NTC] [STR] [Mar 11 20:45:01] webu_strm_ntc: Started camera 0 stream on port 8081
[0:motion] [NTC] [STR] [Mar 11 20:45:01] webu_start_ctrl: Starting webcontrol on port 8080
[0:motion] [NTC] [STR] [Mar 11 20:45:01] webu_start_ctrl: Started webcontrol on port 8080
[0:motion] [NTC] [ENC] [Mar 11 20:45:01] ffmpeg_global_init: ffmpeg libavcodec version 59.37.100 libavformat version 59.27.100
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] translate_init: Language: English
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] motion_start_thread: Camera ID: 0 is from /etc/motion/motion.conf
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] motion_start_thread: Camera ID: 0 Camera Name: (null) Device: /dev/video0
[0:motion] [NTC] [ALL] [Mar 11 20:45:01] main: Waiting for threads to finish, pid: 4498
[1:ml1] [NTC] [ALL] [Mar 11 20:45:01] motion_init: Camera 0 started: motion detection Enabled
[1:ml1] [NTC] [VID] [Mar 11 20:45:01] vid_start: Opening V4L2 device
[1:ml1] [NTC] [VID] [Mar 11 20:45:01] v4l2_device_open: Using videodevice /dev/video0 and input -1
[1:ml1] [ALR] [VID] [Mar 11 20:45:01] v4l2_device_open: Failed to open video device /dev/video0: No such file or directory
[1:ml1] [ERR] [VID] [Mar 11 20:45:01] vid_start: V4L2 device failed to open
[1:ml1] [WRN] [ALL] [Mar 11 20:45:01] motion_init: Could not fetch initial image from camera
[1:ml1] [WRN] [ALL] [Mar 11 20:45:01] motion_init: Motion continues using width and height from config file(s)
[1:ml1] [NTC] [ALL] [Mar 11 20:45:01] image_ring_resize: Resizing pre_capture buffer to 1 items
[1:ml1] [NTC] [ALL] [Mar 11 20:45:01] image_ring_resize: Resizing pre_capture buffer to 4 items
philippe@raspberrypi:~ $ sudo systemctl start motion
philippe@raspberrypi:~ $ sudo nano /etc/motion/motion.conf
philippe@raspberrypi:~ $ sudo systemctl restart motion
philippe@raspberrypi:~ $ cat /etc/motion/motion.conf
# Rename this distribution example file to motion.conf
#
# This config file was generated by motion 4.5.1
# Documentation: /usr/share/doc/motion/motion_guide.html
#
# This file contains only the basic configuration options to get a
# system working. There are many more options available. Please
# consult the documentation for the complete list of all options.
#
############################################################
# System control configuration parameters
############################################################
# Start in daemon (background) mode and release terminal.
daemon off
# Start in Setup-Mode, daemon disabled.
setup_mode off
# File to store the process ID.
; pid_file value
# File to write logs messages into. If not defined stderr and syslog is used.
log_file /var/log/motion/motion.log
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
log_level 6
# Target directory for pictures, snapshots and movies
target_dir /var/lib/motion
# Video device (e.g. /dev/video0) to be used for capturing.
video_device /dev/video0
# Parameters to control video device. See motion_guide.html
; video_params value
# The full URL of the network camera stream.
; netcam_url value
# Name of mmal camera (e.g. vc.ril.camera for pi camera).
; mmalcam_name value
# Camera control parameters (see raspivid/raspistill tool documentation)
; mmalcam_params value
############################################################
# Image Processing configuration parameters
############################################################
# Image width in pixels.
width 640
# Image height in pixels.
height 480
# Maximum number of frames to be captured per second.
framerate 15
# Text to be overlayed in the lower left corner of images
text_left CAMERA1
# Text to be overlayed in the lower right corner of images.
text_right %Y-%m-%d\n%T-%q
############################################################
# Motion detection configuration parameters
############################################################
# Always save pictures and movies even if there was no motion.
emulate_motion off
# Threshold for number of changed pixels that triggers motion.
threshold 1500
# Noise threshold for the motion detection.
; noise_level 32
# Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
despeckle_filter EedDl
# Number of images that must contain motion to trigger an event.
minimum_motion_frames 1
# Gap in seconds of no motion detected that triggers the end of an event.
event_gap 60
# The number of pre-captured (buffered) pictures from before motion.
pre_capture 3
# Number of frames to capture after motion is no longer detected.
post_capture 0
############################################################
# Script execution configuration parameters
############################################################
# Command to be executed when an event starts.
; on_event_start value
# Command to be executed when an event ends.
; on_event_end value
# Command to be executed when a movie file is closed.
; on_movie_end value
############################################################
# Picture output configuration parameters
############################################################
# Output pictures when motion is detected
picture_output off
# File name(without extension) for pictures relative to target directory
picture_filename %Y%m%d%H%M%S-%q
############################################################
# Movie output configuration parameters
############################################################
# Create movies of motion events.
movie_output on
# Maximum length of movie in seconds.
movie_max_time 60
# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
movie_quality 45
# Container/Codec to used for the movie. See motion_guide.html
movie_codec mkv
# File name(without extension) for movies relative to target directory
movie_filename %t-%v-%Y%m%d%H%M%S
############################################################
# Webcontrol configuration parameters
############################################################
# Port number used for the webcontrol.
webcontrol_port 8080
# Restrict webcontrol connections to the localhost.
webcontrol_localhost off
# Type of configuration options to allow via the webcontrol.
webcontrol_parms 0
############################################################
# Live stream configuration parameters
############################################################
# The port number for the live stream.
stream_port 8081
# Restrict stream connections to the localhost.
stream_localhost on
##############################################################
# Camera config files - One for each camera.
##############################################################
; camera /usr/etc/motion/camera1.conf
; camera /usr/etc/motion/camera2.conf
; camera /usr/etc/motion/camera3.conf
; camera /usr/etc/motion/camera4.conf
##############################################################
# Directory to read '.conf' files for cameras.
##############################################################
; camera_dir /usr/etc/motion/conf.d
Statistics: Posted by mabp — Mon Mar 11, 2024 7:58 pm — Replies 0 — Views 11