I can't get Raspberry Pi Camera Module 3 running on RPi 5/bookworm.
What I did:
- Test the camera on a RPi 4 /bullseye -> working
- Fresh installation of Raspberry Pi OS (64-bit)/bookworm on RPi 5
- Running `sudo apt update && sudo apt full-upgrade -y`.
cs@rpi5:~/prg/libcamera $ `libcamera-hello --list-cameras
` -> No cameras available!
Also there is no option under raspi-config -> Interface Options for camera
I also set in /boot/firmware/config.txt camera_auto_detect=0 and at the very end after [all] dtoverlay=imx708. Also I tried several combinations with and without these options.
Here is my system information https://pastebin.com/XFUrHTZc
What I did:
- Test the camera on a RPi 4 /bullseye -> working
- Fresh installation of Raspberry Pi OS (64-bit)/bookworm on RPi 5
- Running `sudo apt update && sudo apt full-upgrade -y`.
cs@rpi5:~/prg/libcamera $ `libcamera-hello --list-cameras
` -> No cameras available!
Also there is no option under raspi-config -> Interface Options for camera
I also set in /boot/firmware/config.txt camera_auto_detect=0 and at the very end after [all] dtoverlay=imx708. Also I tried several combinations with and without these options.
Here is my system information https://pastebin.com/XFUrHTZc
Statistics: Posted by gatonero — Sat Mar 09, 2024 5:37 pm — Replies 0 — Views 1