Hi,
I have the PI5 setup as a Bitcoin Node with the data on a USB3 drive. Suddenly for no apparent reason the USB3 port shuts down.
The error is:
Shortly after that I get a disconnect message on that hub/port ... and is stays off, presumably till I reset the Pi.
Anyone have any idea's, the RPI5 was running at 60degC at the time, could that be an issue? Since components are rated to 70deg and 85deg, I don't see that ... and the other USB3 port is fine, as that has the OS on it ..
I guess the other question is: Can the RPI5 5v handle one NVMe USB3 drive and one Sata3 SSD USB3 at once?
I have the PI5 setup as a Bitcoin Node with the data on a USB3 drive. Suddenly for no apparent reason the USB3 port shuts down.
The error is:
Code:
Feb 16 04:10:52 umbrel kernel: sd 1:0:0:0: [sdb] tag#29 uas_eh_abort_handler 0 uas-tag 13 inflight: CMD OUTFeb 16 04:10:52 umbrel kernel: sd 1:0:0:0: [sdb] tag#29 CDB: opcode=0x2a 2a 00 0c 00 09 40 00 00 08 00Feb 16 04:10:57 umbrel kernel: xhci-hcd xhci-hcd.0: xHCI host not responding to stop endpoint commandFeb 16 04:10:57 umbrel kernel: xhci-hcd xhci-hcd.0: xHCI host controller not responding, assume deadFeb 16 04:10:57 umbrel kernel: xhci-hcd xhci-hcd.0: HC died; cleaning upFeb 16 04:10:57 umbrel kernel: usb 2-1: cmd cmplt err -108Feb 16 04:10:57 umbrel kernel: usb 2-1: cmd cmplt err -108Feb 16 04:10:57 umbrel kernel: usb 2-1: cmd cmplt err -108Feb 16 04:10:57 umbrel kernel: usb 2-1: cmd cmplt err -108Feb 16 04:10:57 umbrel kernel: usb 2-1: cmd cmplt err -108Anyone have any idea's, the RPI5 was running at 60degC at the time, could that be an issue? Since components are rated to 70deg and 85deg, I don't see that ... and the other USB3 port is fine, as that has the OS on it ..
I guess the other question is: Can the RPI5 5v handle one NVMe USB3 drive and one Sata3 SSD USB3 at once?
Statistics: Posted by bmentink — Mon Feb 17, 2025 1:58 am — Replies 1 — Views 57