Hello,
I am having some trouble synchronizing two HQ cameras on an RPi 5.
1. I have connected the XVS and GND test points of two HQ cameras together. I have also created a 10k/10k resistor divider from 3.3V on one of the HQ cameras.
2. I've modified my config.txt to add the following lines:No change was made to the cmdline.txt
Is there anything else that I need to do? It does not seem to be working too reliably, if at all.
Thanks!
I am having some trouble synchronizing two HQ cameras on an RPi 5.
1. I have connected the XVS and GND test points of two HQ cameras together. I have also created a 10k/10k resistor divider from 3.3V on one of the HQ cameras.
2. I've modified my config.txt to add the following lines:
Code:
camera_auto_detect=0dtoverlay=imx477,cam0,sync-sourcedtoverlay=imx477,cam1,sync-sinkIs there anything else that I need to do? It does not seem to be working too reliably, if at all.
Thanks!
Statistics: Posted by maj44 — Fri Jul 26, 2024 1:56 pm — Replies 0 — Views 5