I'm trying to get an IR transmitter working using LIRCD. I also have a WaveShare eInk HAT I will be using. I have a list of pins that the HAT uses so I can choose unused ones.
The LIRCD examples I have are to use GPIO 17 for receive and 18 for transmit. The problem I'm having is that 17&18 do not appear on GPIO READALL.
GPIO READALLAlso, when I look at the standard pinout for 40 pin RPI at https://www.raspberrypi.com/documentati ... ry-pi.html I see discrepancies between the RPI DOC and READALL. Some examples
So my questions are:
The LIRCD examples I have are to use GPIO 17 for receive and 18 for transmit. The problem I'm having is that 17&18 do not appear on GPIO READALL.
GPIO READALL
Code:
+-----+-----+---------+------+---+Pi Zero 2W+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | | | 3.3v | | | 1 || 2 | | | 5v | | | | 2 | 8 | SDA.1 | ALT0 | 1 | 3 || 4 | | | 5v | | | | 3 | 9 | SCL.1 | ALT0 | 1 | 5 || 6 | | | 0v | | | | 4 | 7 | GPIO. 7 | IN | 1 | 7 || 8 | 0 | IN | TxD | 15 | 14 | | | | 0v | | | 9 || 10 | 1 | IN | RxD | 16 | 15 | | 17 | 0 | GPIO. 0 | IN | 0 | 11 || 12 | 0 | OUT | GPIO. 1 | 1 | 18 | | 27 | 2 | GPIO. 2 | IN | 0 | 13 || 14 | | | 0v | | | | 22 | 3 | GPIO. 3 | IN | 0 | 15 || 16 | 1 | IN | GPIO. 4 | 4 | 23 | | | | 3.3v | | | 17 || 18 | 0 | IN | GPIO. 5 | 5 | 24 | | 10 | 12 | MOSI | ALT0 | 0 | 19 || 20 | | | 0v | | | | 9 | 13 | MISO | ALT0 | 0 | 21 || 22 | 0 | IN | GPIO. 6 | 6 | 25 | | 11 | 14 | SCLK | ALT0 | 0 | 23 || 24 | 1 | OUT | CE0 | 10 | 8 | | | | 0v | | | 25 || 26 | 1 | OUT | CE1 | 11 | 7 | | 0 | 30 | SDA.0 | IN | 1 | 27 || 28 | 1 | IN | SCL.0 | 31 | 1 | | 5 | 21 | GPIO.21 | IN | 1 | 29 || 30 | | | 0v | | | | 6 | 22 | GPIO.22 | IN | 1 | 31 || 32 | 0 | IN | GPIO.26 | 26 | 12 | | 13 | 23 | GPIO.23 | IN | 0 | 33 || 34 | | | 0v | | | | 19 | 24 | GPIO.24 | IN | 0 | 35 || 36 | 0 | IN | GPIO.27 | 27 | 16 | | 26 | 25 | GPIO.25 | IN | 0 | 37 || 38 | 0 | IN | GPIO.28 | 28 | 20 | | | | 0v | | | 39 || 40 | 0 | IN | GPIO.29 | 29 | 21 | +-----+-----+---------+------+---+----++----+---+------+---------+-----+-----+ | BCM | wPi | Name | Mode | V | Physical | V | Mode | Name | wPi | BCM | +-----+-----+---------+------+---+Pi Zero 2W+---+------+---------+-----+-----+t- GPIO 2 is on pin 3 and now shows as pin 13
- GPIO 17 is on pin 11 but not even listed in READALL
So my questions are:
- Can someone explain why there is a discrepancy in the pin outs?
- What is a good alternative to use instead of 17 & 18
Statistics: Posted by DS256 — Sat Jan 13, 2024 11:05 pm — Replies 3 — Views 1086