I have the rapsbery pie 5 8gb and trying to test the camera but I always get "no cameras available" after running the command libcamera-hello --list-cameras, I have Debian GNU/Linux 12 (bookworm) installed
I ahve updated all several times everything.
this is the camera I have bought
https://www.amazon.co.jp/-/en/FNK0056/d ... atf_m&th=1
when I connect the camera to with rib cable the led on the camera goes on so it is not the issue.
The camera is connected to the port 0 of the pi
After accessing the config with "sudo nano /boot/firmware/config.txt" i have edited the camera_auto_detect = 0 and added at the bottom "dtoverlay=imx219"
i have also tested with the value to 1 but still
when i run "ls /dev/video*" the video0 does not list
no matter what i still get "no cameras available"
I have no idea what I should here
any help or idea is welcome
I ahve updated all several times everything.
this is the camera I have bought
https://www.amazon.co.jp/-/en/FNK0056/d ... atf_m&th=1
when I connect the camera to with rib cable the led on the camera goes on so it is not the issue.
The camera is connected to the port 0 of the pi
After accessing the config with "sudo nano /boot/firmware/config.txt" i have edited the camera_auto_detect = 0 and added at the bottom "dtoverlay=imx219"
i have also tested with the value to 1 but still
when i run "ls /dev/video*" the video0 does not list
no matter what i still get "no cameras available"
I have no idea what I should here
any help or idea is welcome
Statistics: Posted by jrme421 — Mon May 06, 2024 6:47 am — Replies 0 — Views 10